五马弗贯穿式淬火设

for Hardening of Bimetal Saw Bands

Technical data

Furnace designation:

electrically heated pull-through furnace hardening plant

Rated furnace temperature:

e. g. 1,230 °C

Protective gas:

e. g. non-inflammable gases like nitrogen or argon

Application

In general the pull-through furnace hardening plants can be used for heat treatment of steel bands, bimetal saw bands, industrial blades, razor blades, scalpels etc. which are made of the corresponding kinds of steel.

Furnace Description

The pictured 5-muffle pull-through furnace plant is used for continuous hardening and tempering of CrNi band steel in protective gas atmosphere.

This industrial furnace plant is fully automatic. The control and regulation procedures are managed by a PLC. In order to comfortably operate the plant it is equipped with a control panel for visualization. All relevant data for quality assurance can be saved on a separate PC and used for further evaluations.

The scope of delivery of this industrial furnace plant comprises, apart from the hardening furnace, the tempering furnace and the measuring and control station, an integrated band cleaner, a cooling and freezing device as well as band pull-through equipment. The latter is equipped with a control that is connected to the furnace control.